REPLACEMENT UNILITE MODULE
Mallory's UNILITE (r), and Magnetic Breakerless Ignition Modules are self contained module assemblies which have no moving parts to wear out. Using Mallory's time tested breakerless ignition circuit, combined with modern surface mount Thermal-Cladé construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER Coil or a Mallory Chrome Electronic Ignition Coil. These are also an excellent choice for triggering one of the Mallory HYFIREé Series of Electronic Ignition Controls. Hookup is as easy as a three wire connection.
Model Number: 605
3-Port Street and Competition Fuel Pressure Regulator Gasoline. For Carburetion Return (Bypass) Style. Features At A Glance: CNC-machined billet aluminum construction. Special quick action diaphragm design. Return-style design extends pump life and eliminates pressure drop at launch. A must for high-pressure fuel pumps to prevent carburetor flooding. Flow-matched inlet and outlets for perfect pump matching. Built-in fuel pressure port. Fully serviceable - not a "throw-away" like most competitors. Available for use with gasoline or alcohol/methanol. Complete with mounting bracket and hardware. Compact design fits where others cannot. Easy to install and adjust for maximum performance. Design-matched for use with 70, 110, and 140 Series Mallory Comp Pumps.
ACTIVE POWER FILTER
The Active Power Filter is designed for UNILITE (r)é Ignition Systems that experience failures with the ignition modules from voltage spikes (voltage transients, power surges). Voltage spikes are associated with "noisy" electrical systems from electrical defects such as worn or dirty alternator brushes, corroded or oxidized electrical connections and similar electrical problems. Voltage spikes are clamped and regulated by the Active Power Filter from damaging the UNILITE (r)é Ignition Module. The Active Power Filter connects between the distributor female connector and the distributor wire harness male connector and attaches easily to the distributor with velcro.
Model Number: 29351
UNIVERSAL FUEL PRESSURE REGULATOR
Street and Competition Fuel Pressure Regulator Gasoline & Alcohol. Features At A Glance: CNC-machined billet aluminum construction. Special quick action diaphragm design. A must for high-pressure fuel pumps for maximum performance. Flow-matched inlet and outlets for perfect pump matching. Allows you to fine tune your fuel injection. Built-in fuel pressure port. Built-in pressure compensating for supercharged/turbocharged engines. Fully serviceable - not a "throw-away design" like most competitors. Available for use with gasoline or alcohol/methanol. Complete with mounting bracket and hardware. For high pressure fuel injection applications. Unique diaphragm material resists all fuel additives, even alcohol and methanol. Built-in dampening system helps prevent pressure bounce and chatter. Broadest possible pressure range. Easy to install and adjust for maximum performance. Design-matched for use with 60FI and 110FI Mallory Comp Pumps, Mallory High Output In-Tank and In-Line Pumps. Specifications: Inlet & Return Size: 3/4"-16 (#8 AN), Maximum Inlet Pressure: Unlimited, Outlet Size: 3/8"NPT, Adjustment Range: 30-100 PSI, Gauge Port: Size: 1/8" NPT, & Recommend Maximum Flow: 200 GPH.
Model Number: 4305M
E-SPARK REPLACEMENT MODULE
Replacement module for E-Spark conversion kits. This module can also be used as a direct replacement for Unilite Module #605.
Model Number: 6100M
Features At A Glance:
• Direct Plug-in for GM HEI equipped Cars and Trucks
(Pre-Computer)
• Available With Matching Mallory High Performance
Coil (except as noted)
• Mechanical Advance Plus Adjustable Vacuum Advance
• Mallory Electronics For High Performance Dwell and
Coil Saturation
• Precision CNC Machined Billet/Cast Housing for
Maximum Timing Accuracy
• For Non Computer Controlled Cars and Trucks
Model Number: 8548201C
HYFIRE 6AL DIGITAL CD IGNITION
HYFIRE 6-AL Digital CD Ignition Features At A Glance: High output multi-spark ignition system. Digital performance at analog prices. Built-in easy-to-adjust digital rev limiter - 4,500 to 12,000 RPM - no chips required! Latest microprocessor-controlled circuitry. Easy to install. Lightweight aluminum housing - maximum heat transfer. More performance and lower power draw. Quicker acceleration and throttle response. Works with points, OEM or aftermarket electronic ignition, or magnetic crank triggers (exc. hall effect).
Model Number: 6853M
Click to Check Availability
ELECTRONIC CANISTER STYLE COIL
Universal Street Performance Chrome Ignition Coil For Unilite & Magnetic Breakerless (MBI) Distributors And Conversion Kits. Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or Magnetic Breakerless Ignitions Mallory HYFIRE IV Electronic Ignition Controls, and Mallory Electronic Ignition Conversion Kits. Fits most original equipment coil brackets, or use Mallory Super Duty Coil Bracket (29221 or 29224). Not for use with Mallory HYFIRE Electronic Ignition Control or any other high energy, inductive storage or capacitive discharge ignition system.
Model Number: 29219
PROMASTER COIL-STREET/STRIP
Universal Street and Strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (r) Distributor with a HYFIRE (r) Capacitive Discharge Ignition, Magnetic Breakerless Distributor with a HYFIRE (r) Capacitive Discharge Ignition, or Dual Point Distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE Electronic Ignition Control (depending on engine combination).
Model Number: 29440
HYFIRE 6A DIGITAL CD IGNITION
HYFIRE 6A Digital CD Ignition Features At A Glance: High output multi-spark ignition system. Digital performance at analog prices. Latest microprocessor controlled circuitry. Easy to install. Lightweight aluminum housing - maximum heat transfer. More performance and lower power draw. Quicker acceleration and throttle response. Works with points, OEM or aftermarket electronic ignition, or magnetic crank triggers (exc. hall effect). Primary Output Voltage: 520, Secondary Voltage Output: 45000, Spark Energy: 135mj.
Model Number: 6852M
POINTS BALLAST RESISTOR
Delivers 200-watt rating and uses threaded terminals for better wire retention. Available for most standard point type and electronic ignitions. Variable resistance values imporve cold weather starting and is rated at 0.75- 1.5 ohms.
Model Number: 700
PROMASTER E-SERIES IGNITION COIL
Universal Street and Strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE Distributor with a HYFIRE Capacitive Discharge Ignition, Magnetic Breakerless distributor with a HYFIRE Capacitive Discharge Ignition, or Dual Point Distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE Electronic Ignition Control (depending on engine combination). Features At A Glance: Faster rise time and increased spark duration (compared to stock) increases performance. High Efficiency E-Core design for maximum performance. Extruded aluminum mount for great heat dissipation, mounting ease and good looks. Packaged with plug in style wiring connector for easier installation.
Model Number: 30440
CAP & ROTOR/SHUTTER WHEEL KIT
Matching cap and rotor kits make it easy to keep what you need right on hand. Now available for all popular V8 and most popular 4 cylinder Mallory distributors with standard socket style stack (upright tower) caps. For V-8 UNILITE style distributors (with or without vacuum advance).
Model Number: 2092M
ELECTRONIC CANISTER STYLE COIL
Universal Street Performance Chrome Electronic Ignition Coil. Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. Delivers optimum performance when used with: Mallory UNILITE or Magnetic Breakerless Distributors equipped with a capacitive discharge ignition, Mallory HYFIRE IV and VI Series Electronic Ignition Controls or original equipment breakerless electronic ignition systems. Fits most original equipment coil brackets, or use Mallory Super Duty Coil Bracket (29221 or 29224). Not for use with Mallory HYFIRE Electronic Ignition Control P/N 629, 630, 693, 29026, 29062A, 29028, 29029, 29037, or any other high energy, inductive storage ignition system.
Model Number: 29216
E-SPARK CONVERSION KIT-DELCO
Fits 1957-74 GM/Delco distributor with externally adjustable points (window cap style), V8 engines. Mallory's new low cost E-Spark Conversion Kits eliminate points in GM, Ford, and Chrysler distributors. Designed with ease of installation in mind, these kits eliminate the pesky problem of constantly having to change and adjust points forever. Even better, everything fits inside the distributor so everything is self-contained and looks original on the outside. No moving parts to wear out, and gain better drivability and throttle response. Use Mallory coils #29219, 29450 or 30450 for matched performance.
Model Number: 61001M
MODEL 110 ELECTRIC FUEL PUMP
Model 110 High Performance Electric Fuel Pump. Features At A Glance: Precision CNC-machined pump housings insure long life versus cast housings. Gerotor design reduces noise versus louder vane and turbine pumps. Tough Gerotor pump design eliminates vane breakage problems. All aluminum components anodized for corrosion and wear resistance. High efficiency electric motors deliver more output using less amps than competitors. Includes complete hardware package for easy mounting. High pressure, 12-volt fuel pump delivers 110+ GPH free flow @ 12.5 volts. Internal bypass regulator factory set at 7 PSI. Delivers 90+ GPH at 6 PSI. 3/8" NPT thread size, 3/8" or larger fuel line recommended. Use regulator part number 4207, 4210, 4307M, 4316M or 4309 for best performance. Service parts available for use with alcohol/ methanol applications.
Model Number: 4110
STREET PERFORMANCE ELECTRONIC
UNILITE® ELECTRONIC – 37, 38 & 45 Series
• Electronic ignition with a one-piece self-contained
optical pickup and module, utilizes easy 3-wire hookup,
and adjustable mechanical advance.
• Includes Mallory Super-Duty Cap (Points Style) and
Rotor with brass terminals
• Can be used alone with high performance coil such as
Mallory PROMASTER® Series or add on more power
with HYFIRE® CD Ignition Controls
REPLACEMENT MAGNETIC BREAKERLESS MODULE
Mallory's UNILITE (r), and Magnetic Breakerless Ignition Modules are self contained module assemblies which have no moving parts to wear out. Using Mallory's time tested breakerless ignition circuit, combined with modern surface mount Thermal-Cladé construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER Coil or a Mallory Chrome Electronic Ignition Coil. These are also an excellent choice for triggering one of the Mallory HYFIREé Series of Electronic Ignition Controls. Hookup is as easy as a three wire connection.
Model Number: 609
CAP,DIST MAL 8CYL
Mallory Distributor Cap - 8 Cyl - OE Replacement Part
Model Number: 209M
Click to Check Availability
Can Withstand Over 500+F
Withstands Grease And Moisture
No Moving Parts To Wear Out
Better Drivability and Throttle Response
Easy To Install
Click to Check Availability
Run With Fuel Pressure Regulator
Provides Stable Output
Provides Stable Pressure
Internally Bypassed
Output Pressure Adjustable
Fully Machined Housing
Fully Machined Pump Body
UNILITE ELECTRONIC DISTRIBUTOR
Application: Chevrolet 1955-96 V8/RH 262-454, 502 except 348, 409, Tall Block and 1955-74 Corvette
The most advanced in the industry - for both racing performance & street economy. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life & cold weather starting. Includes adjustable vacuum advance. Fits Chevy V8 262-454 & 502ci.Model Number: 4748201
DIST,FORD 351W STREET HEI W/COIL
Features At A Glance:• Direct Plug-in for GM HEI equipped Cars and Trucks
(Pre-Computer)
• Available With Matching Mallory High Performance
Coil (except as noted)
• Mechanical Advance Plus Adjustable Vacuum Advance
• Mallory Electronics For High Performance Dwell and
Coil Saturation
• Precision CNC Machined Billet/Cast Housing for
Maximum Timing Accuracy
• For Non Computer Controlled Cars and Trucks
Model Number: 8555401C







