The MSD Atomic Efi Kit 2900 is the real deal of conversion kits. Use the MSD Atomic EFI conversion kit to replace ANY 4 barrel carb! Returnless fuel system design to take out the hassle of running that extra line. This is the complete kit for anyone planning to convert from a carburetor to Atomic EFI. You get the Throttle Body, Power Module (with Wide Band O2 sensor), Handheld Controller, and the Standard Fuel Kit for up to 525hp (at the crank).
BBK billet fuel pressure regulators are a great way to tune your vehicle to obtain optimum air / fuel ratios and achieve maximum horsepower.
Each fuel pressure regulator is made from high quality CNC machined billet aluminum with a long lasting anodized blue finish.
Each fuel pressure regulator is hand assembled with a precision leak free diaphragm that will allow fuel pressure adjustment to approximately 65psi.
These BBK fuel pressure regulators are direct replacements for your stock pre set regulator and offer the best performance and value.
All units are pressure tested at the factory.
Click to Check Availability
Application: Performance Fuel Injectors 21 lbs/hr 8/pkg
Provides precise control of fuel delivery & atomization for increased power, improved throttle response, & better fuel economy
Provides precise control of fuel delivery & atomization for increased power, improved throttle response, & better fuel economy
Click to Check Availability
Click to Check Availability
Click to Check Availability
Provides precise control of fuel delivery & atomization for increased power, improved throttle response, & better fuel economy
Click to Check Availability
Click to Check Availability
BBK billet fuel pressure regulators are a great way to tune your vehicle to obtain optimum air / fuel ratios and achieve maximum horsepower.
Each fuel pressure regulator is made from high quality CNC machined billet aluminum with a long lasting anodized blue finish.
Each fuel pressure regulator is hand assembled with a precision leak free diaphragm that will allow fuel pressure adjustment to approximately 65psi.
These BBK fuel pressure regulators are direct replacements for your stock pre set regulator and offer the best performance and value.
All units are pressure tested at the factory.
Tuning is accomplished with the simple twist of a screw.
Provides precise control of fuel delivery & atomization for increased power, improved throttle response, & better fuel economy
Click to Check Availability
Click to Check Availability
Click to Check Availability
Click to Check Availability
Click to Check Availability
Click to Check Availability
The engineers at BBK have just released an all new line up of High-flow Mass Air Meters for owners of the popular 1986-1993 Mustang V8 models or those enthusiasts who are Retrofitting an EFI Motor into an early Muscle Car or Street Rod.
Starting with an all new 356 Aluminum casting\, each unit is Powder Coated then fully CNC Machined to exact specifications before being fitted with one of BBK�s new Electronically Calibrated Mass Air Sensor modules to ensure an accurate Air/Fuel Ratio for the best possible Performance potential. Dyno testing has shown up to 15 RWHP gains while maintaining an accurate Air/Fuel Ratio\, unlike some competitor�s units that are not Electronically Calibrated that may fail to maintain the all important Air/Fuel Ratio.
76mm - 24lb Cold Air Box Calibration
BBK billet Fuel pressure Regulators are a great way to tune your vehicle to obtain optimum air / fuel ratios and achieve maximum horsepower.
Each fuel pressure regulator is made from high quality CNC machined billet aluminum with a long lasting anodized blue finish.
Will allow fuel pressure adjustment to approximately 65psi.
These BBK fuel pressure regulators are direct replacements for your stock pre set regulator and offer the best performance and value
. Tuning is accomplished with the simple twist of a screw.
Please Note:
*Includes OEM direct fit manifold runner gaskets. Great for mild to wild applications.
Click to Check Availability
While developing and Dyno testing our SSI-Series Intake Manifold for the 1986-1993 5.0L Mustang The BBK engineers found that the Small Steel Factory Fuel Rails left much to be Desired. This resulted in the development of BBK's current High-flow Aluminum Fuel Rails that are included in many of BBK's Performance Intake Manifolds as Standard Equipment.
While developing these Fuel Rails the BBK team also made sure that these units would work stock or on other aftermarket Intake Manifolds so enthusiasts could get the same Great Performance and value that they deliver. Built from Lightweight Aluminum each Rail is CNC Machined to precise tolerances and Blue Anodized for Maximum Performance and Longevity.
Click to Check Availability
Click to Check Availability
Click to Check Availability
Click to Check Availability
