Tennessee Speed Sport :: Engine Components :: Edelbrock 60069 Performer RPM FE Cylinder Head

Printable version

Edelbrock 60069 Performer RPM FE Cylinder Head- $749.99

Edelbrock 60069 Performer RPM FE Cylinder Head

Performer RPM FE for 390-428 Cobra Jet (72cc combustion chambers)-Complete Assembly

Performer RPM FE

Direct bolt-on heads for 1961-76 390-427-428 Fords
428 Cobra Jet-sized valves promote excellent flow for streetable power
#60089 can be machined to accept 2.19" intake and 1.73" exhaust valves

Combustion chamber volume	72cc & 76cc
Intake runner volume	170cc
Exhaust runner volume	125cc
Intake valve diameter	2.09" (B)
Exhaust valve diameter	1.66" (B)
Valve stem diameter	3/8"
Valve guides	Manganese bronze
Deck thickness	5/8"
Valve spring diameter	1.55"
Valve spring maximum lift	.600"
Rocker stud	–
Guideplate	N/A
Pushrod diameter	3/8"
Valve angle	13°
Exhaust port location	Stock
Spark plug fitment	14mm x 3/4 reach, gasket seat
Made In	USA

Technical Notes: Match with Edelbrock head gasket sets. 76cc heads have vertical bolt pattern only, 390 GT exhaust will not fit. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs 14mm x 3/4" reach with flat gasket seat (Champion RC12YC).

Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench

61699
Valve Lift	.100"	.200"	.300"	.400"	.500"	.600"	.700"
Intake	88	153	195	233	265	270	-
Exhaust	64	113	148	171	183	200	-