Click to Check Availability
Comp Cams 30227-KIT
Application; Regardless of your brand or size, this system bolts-on easily to any carbureted engine with up to 550 horsepower – NO manifold replacement needed.• Get the benefit of easy EFI tuning on existing multi-port injected systems
• Complete system with self-tuning module
• Achieves a high state of tune without a lap top
• No previous EFI tuning experience is necessary
• Built in diagnostics program
• Can run up to eight high impedance injectors
• Suitable for any application from street to race
• Requires vacuum referenced fuel pressure regulator
• Includes everything you need, nothing else to buy
ZDDP-enhanced Engine Break-In Oil from COMP Cams® provides maximum engine life while also allowing it to reach its full performance potential. It does so by improving the surface mating of valve train components (especially flat tappets), rotating assembly, rod journals, piston rings, valve guides and other vital areas of the engine. This proprietary formula includes the optimum amount of critical additives ZDDP (Zinc & Phosphorus), Molybdenum, detergents and high grade base oil.
The multi-viscosity, mineral-based COMP Cams® Engine Break-In Oil is fully-formulated and requires no additives or supplements. In addition, the oil is fully compatible with gasoline, methanol and high octane racing fuels.
Ground Shipping Only – Federal Regulations Prevent Air Shipment Of This Product
High Energy Hydraulic; Lifter Set; Chevrolet; V8; 16 pc.;
High Energy Pushrods 5/16" Diameter, 7.794" Length; High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy™ and Magnum Rocker Arms. * Best choice when building street rods, RVs or daily drivers * Meet or exceed all OE pushrod specifications * Mate perfectly with High Energy™ & Magnum Rockers * Durable one-piece construction
Magnum Double Roller; Timing Set; Chevrolet;
These Magnum Roller Rocker Arms for Chevy V8 396-454; Ford Boss 302, 351C-400M; and Ford V8 429-460 applications are the ultimate street rocker. With a 7/16" stud diameter and 1.72 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 35O lbs. open spring pressure. Don't accept inferior products or cheap knock-offs, look for the COMP Cams® logo stamped into the underside of every Magnum Rocker.
1.254 Outer With Damper; 16 pc.;
Single Spring Beehive; Street/Strip Valve Springs; 1.055/1.29 in.; 0.660/.885 in. I.D.; 16 pc.;
2 Spring Assembly; 16 pc.;
- O.D. of Outer 1.430"
- I.D of Outer 1.070"
- I.D. of Inner 0.697"
- Seat Pressure 132 @ 1.750"
- Open Pressure 293 @ 1.250"
- Coil Bind Height 1.150"
- Use with Steel Retainer 1730 or 740
- Use with Titanium Retainer 730
Dual Valve Springs from COMP Cams® are manufactured from Super Clean™ wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams® Dual Valve Springs exceed the expectations of today’s engine builders and racers.
Magnum Roller Rockers; Rocker Arms; Rocker Stud 3/8 in.; Ratio 1.52; For Use w/Hyd. Flat Tappet Cams; 16 pc.;
Ultra Pro Magnum; Rocker Arm; 16 pc.;
Solid/Mechanical; Lifter Set; GM V8; 16 pc.;
High Energy Hydraulic; Lifter Set; 16 pc.;
Carbon Ultra-Poly Composite Distributor Gear; 0.500 in. Shaft Dia.; w/Beveled Tooth; Chevrolet Small And Big Block;
Hydraulic flat tappet Xtreme Energy cam and lifter kit. RPM range 1600-5800, Adv.Dur. 268 Int./280 Exh., V.Lift .477 Int./.480 Exh., Lobe 110 deg, Includes Camshaft and lifters.
Recommended Components
- Rocker Pushrod RP-Kit RP1412-16 / RPM1301-16
- Timing Set 2100 / 3100
- Rocker Arms 1412-16 [15,5
- Push Rods 7812-16 / 7372-16
- Valve Springs 981-16 / 986-16 [2]
- Steel Retainers 742-16 / 740-16 [3]
- Valve Locks 601-16 / 613-16
- Valve Seals 501-16 / 503-16 [2]
- Camshaft Break-In Lube 159
Installation Notes (These notes apply to the above recommended components with the trailing installation note numbers)
- [2] Requires machining on cylinder heads.
- [3] Standard weight and lightweight retainers
- [7] Stock springs cannot be used.
- [15] 50-State legal on ‘93 & earlier S.B. Chevrolet V8, 262-400 c.i., C.A.R.B. E.O. #D-279-4.
- [52] Engines with self-aligning rocker arms must use part #1417-16 or 1317-16
Magnum Roller Rockers; Rocker Arms; 16 pc.; Rocker Stud 3/8 in.; Ratio 1.6;
High Energy; Camshaft/Lifter Kit; Hyd Flat Tappet;1500-5500rpm;Adv.Dur. 268 Int./Exh.;V.Lift .454 Int./Exh. Lobe 110 deg.;Incl. Cam/Lifters;Chevrolet;
High Torque Cams
For Street Applications w/Lower Compression Ratios
Can Be Used w/Most Stock Components
1 Year Limited Warranty
Hi Tech Roller Race; Timing Set; Chevrolet V8; 305-350; With Factory Roller Cam;
Magnum Double Roller; Timing Set; Requires 2pc. Fuel Pump Eccentric;
