Choose the power level you want. Performer-Plus: Designed for optimum torque from the low-end to the mid-range, camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily driving.
#2102
ENGINE: CHEVY 265-350 V8
RPM RANGE: Idle-5500
| Duration at 0.006" Lift: | Intake: 278° | Exhaust: 288° |
| Duration at 0.050" Lift: | Intake: 204° | Exhaust: 214° |
| Lift at Cam: | Intake: 0.280" | Exhaust: 0.295" |
| Lift at Valve: | Intake: 0.420" | Exhaust: 0.442" |
| Timing at 0.050" lift: | Open | Close |
| Intake: | 5° ATDC | 29° ABDC |
| Exhaust: | 44° BBDC | 10° BTDC |
| Centerlines: | Lobe Separation - 112° | Intake Centerline - 107° |
CAUTION: Use Performer-Link Timing Chain and Gear Set, #7800. Do not use late model timing sets. They are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Performer-Link True Rolling Timing Sets feature three keyways for specific timing selection. Always use the “0” or straight-up timing mark when installing Performer-Plus camshafts with Performer-Link Timing Sets.
Use only Sure Seat Valve Springs, #5802 or 5902 Use stock ratio rocker arms only
Performer RPM: Designed for street high-performance applications, cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque.
#7102
ENGINE: CHEVY 283-400 V8
RPM RANGE: 1500-6500
| Duration at 0.006" Lift: | Intake: 308° | Exhaust: 318° |
| Duration at 0.050" Lift: | Intake: 234° | Exhaust: 244° |
| Lift at Cam: | Intake: 0.325" | Exhaust: 0.340" |
| Lift at Valve: | Intake: 0.488" | Exhaust: 0.510" |
| Timing at 0.050" lift: | Open | Close |
| Intake: | 10° BTDC | 44° ABDC |
| Exhaust: | 59° BBDC | 5° ATDC |
| Centerlines: | Lobe Separation - 112° | Intake Centerline - 107° |
Note: Use only stock ratio rocker arms.
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set #7800 or Accu-Drive gear drive #7890. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection. Use "0" position for most applications.
Do not use dual valve springs.Use only recommended Edelbrock Sure Seat. Valve Springs #5703. Use stock ratio rocker arms only.
Hydraulic flat tappet Xtreme Energy cam and lifter kit. RPM range 1600-5800, Adv.Dur. 268 Int./280 Exh., V.Lift .477 Int./.480 Exh., Lobe 110 deg, Includes Camshaft and lifters.
Recommended Components
- Rocker Pushrod RP-Kit RP1412-16 / RPM1301-16
- Timing Set 2100 / 3100
- Rocker Arms 1412-16 [15,5
- Push Rods 7812-16 / 7372-16
- Valve Springs 981-16 / 986-16 [2]
- Steel Retainers 742-16 / 740-16 [3]
- Valve Locks 601-16 / 613-16
- Valve Seals 501-16 / 503-16 [2]
- Camshaft Break-In Lube 159
Installation Notes (These notes apply to the above recommended components with the trailing installation note numbers)
- [2] Requires machining on cylinder heads.
- [3] Standard weight and lightweight retainers
- [7] Stock springs cannot be used.
- [15] 50-State legal on ‘93 & earlier S.B. Chevrolet V8, 262-400 c.i., C.A.R.B. E.O. #D-279-4.
- [52] Engines with self-aligning rocker arms must use part #1417-16 or 1317-16
High Energy; Camshaft/Lifter Kit; Hyd Flat Tappet;1500-5500rpm;Adv.Dur. 268 Int./Exh.;V.Lift .454 Int./Exh. Lobe 110 deg.;Incl. Cam/Lifters;Chevrolet;
High Torque Cams
For Street Applications w/Lower Compression Ratios
Can Be Used w/Most Stock Components
1 Year Limited Warranty
Magnum; Camshaft/Lifter Kit; Hyd Flat Tappet;RPM 2000-6000;Adv.Dur. 280 Int./Exh.;V.Lift .480 Int./Exh.;Lobe 110 deg;Incl. Cam; Lifters;Chevrolet;
Magnum; Camshaft/Lifter Kit; Hyd Flat Tappet;RPM 1800-5800;Adv.Dur. 270 Int./Exh.;V.Lift .470 Int./Exh.;Lobe 110 deg;Incl. Cam; Lifters;
Click to Check Availability
Magnum; Camshaft/Lifter Kit; Hyd Flat Tappet;RPM 2500-6500;Adv.Dur. 292 Int./Exh.;V.Lift .501 Int./Exh.;Lobe 110 deg;Incl. Cam; Lifters;Chevrolet;
Xtreme Energy; Camshaft/Lifter Kit; Hyd Flat Tappet;RPM 1800-6000;Adv.Dur. 274 Int./286 Exh.;V.Lift .490 Int./Exh.;Lobe 110 deg;Incl. Cams;Lifters;
High Energy; Camshaft Kit; Hyd Flat Tappet;1500-5500rpm;Adv.Dur. 268 Int./Exh.;V.Lift .454 Int./Exh.;Lobe 110 deg;Chevrolet;Incl.Cam/Lifter/V.Sprng/Ret./Lock/Seal/Timing Set;
Magnum; Camshaft; Hyd. Flat Tappet; 2000-6000rpm; Adv. Dur. 280 Int./Exh.; Valve Lift .480 Int./Exh.; Lobe Angle 110 deg.; Chevrolet;
Xtreme Energy; Camshaft/Lifter Kit; Hyd Flat Tappet;RPM 1300-5600;Adv. Dur. 262 Int./270 Exh.;V.Lift .462 Int./.469 Exh.;Lobe 110 deg;Incl. Cams;Lifters;
Click to Check Availability
Thumpr; Camshaft/Lifter Kit; Retro-Fit Hyd. Flat Tappet; 1800-5600rpm; Adv. Dur. 279 Int./297 Exh.; Valve Lift .498 Int./.483 Exh.; Lobe Angle 107 Deg.; Incl. Cam/Lifters;
Xtreme Energy; Camshaft/Lifter Kit; Hyd Flat Tappet;RPM 2300-6500;Adv.Dur. 284 Int./296 Exh.;V.Lift .507 Int./.510 Exh.;Lobe 110 deg;Incl. Cams;Lifters;
Click to Check Availability
High Energy; Camshaft; Hyd. Flat Tappet; 1500-5500rpm; Adv. Dur. 268 Int./Exh.; Valve Lift .454 Int./Exh.; Lobe Angle 110 deg.; Chevrolet;
High Torque Cams
For Street Applications w/Lower Compression Ratios
Can Be Used w/Most Stock Components
1 Year Limited Warranty
Magnum; Camshaft Kit; Hyd Flat Tappet;RPM 2000-6000;Adv.Dur. 280 Int./Exh.;V.Lift .480 Int./Exh.;Lobe 110 deg;Incl.Cam;Lifter;V.Sprng/Ret./Lock/Seal;Timing Set;
Click to Check Availability
Click to Check Availability
Thumpr; Camshaft; Retro-Fit Hyd. Flat Tappet; 2000-5800rpm; Adv. Dur. 279 Int./297 Exh.; Valve Lift .479 Int./.465 Exh.; Lobe Angle 107 deg.;
Click to Check Availability
Xtreme 4 X 4; Camshaft/Lifter Kit; Hyd Flat Tappet;RPM 1000-5200;Adv.Dur. 254 Int./262 Exh.;V.Lift .447 Int./.462 Exh.;Lobe 111 deg; Incl. Cam; Lifters;
Computer Controlled; Camshaft; Hyd. Flat Tappet; 1000-5000rpm; Adv. Dur. 252 Int./260 Exh.; Valve Lift .425 Int./.440 Exh.; Lobe Angle 112 deg.;
Magnum; Camshaft; Hyd. Flat Tappet; 2500-6500rpm; Adv. Dur. 292 Int./Exh.; Valve Lift .501 Int./Exh.; Lobe Angle 110 deg.; Chevrolet;
