As one of today’s favorite performance bolt-ons, cold air intake systems kits deliver great looks as well as real world horsepower gains.

As the originator of the first of these chrome systems back in the early nineties, our famous BBK line continues to offer the leading edge quality and function that BBK customers expect.

All BBK cold air intake systems utilize a high flow washable conical cotton element filter and most are designed as fender well units to maximize performance. In addition to our standard hand polished and chrome plated cold air intake systems, we now offer a variety of kits utilizing a custom designed lightweight aluminum inlet casting, which is hand polished and chrome plated. These trick castings deliver unmatched quality and a custom fit for a variety of auto and truck applications.

Each cold air intake model has been designed and dyno tested at the BBK headquarters in Southern California to maximize performance.

Please Note:
Part #1556: 50 State legal - CARB D-245-14 on all 1986-1993 Ford Mustang 5.0L
Part #1557: 50 State legal - CARB D-245-14 on all 1986-1993 Ford Mustang 5.0L

BBK billet fuel pressure regulators are a great way to tune your vehicle to obtain optimum air / fuel ratios and achieve maximum horsepower.

Each fuel pressure regulator is made from high quality CNC machined billet aluminum with a long lasting anodized blue finish.

Each fuel pressure regulator is hand assembled with a precision leak free diaphragm that will allow fuel pressure adjustment to approximately 65psi.

These BBK fuel pressure regulators are direct replacements for your stock pre set regulator and offer the best performance and value.

All units are pressure tested at the factory.

BBK O2 Wire Harness Extenders - A must when Installing Full Length Headers - so that the O2 Sensors reach New O2 sensor Locations on the headers. Factory OEM connectors and heat protective sleeves make installation a snap. (Sold in Pairs)

These are 4 wire and can be used for 3 or 4 wire O2 - Connectors May require the small directional tabs to be removed on the ends of the connectors to fit some applications.

ALL BBK Shorty Unequal Length Mustang Exhaust headers are manufactured with 1 5/8" CNC mandrel bent tubing for un-restrictive airflow and a one piece laser cut flange for added strength and durability. ALL BBK Headers are Pressure tested to ensure leak free performance.

Each BBK Mustang shorty exhaust header for the 1986-1993 5.0L Ford Mustang has been designed and dyno tested at the BBK headquarters in Southern California to Maximize performance.

BBK’s Mustang headers offer distinctive quality that guarantees many years of top performance.

These BBK CNC Series headers for the Ford Mustang 5.0 GT are also available with our optional high-temp show quality Silver polished ceramic coating or chrome finish.

Please Note:
Part #1515: 50 State legal - CARB D-245-8 on all 1986-1993 Ford Mustang 5.0L
Part #15150: 50 State legal - CARB D-245-8 on all 1986-1993 Ford Mustang 5.0L

Available to fit ALL 1979 through 2004 Ford Mustangs. These BBK Heavy Duty Adjustable Clutch Cable & Aluminum Quadrant Kits eliminate sticky shifts and hard to find reverse gears. These kits will work on ALL stock applications to give more adjustability.

The OEM Style hard cased heavy duty adjustable cable and aluminum quadrant are designed to replace the weak stock plastic quadrant that breaks easily especially when installing a heavy duty after market clutch that requires additional pedal pressure.

For even more adjustability, we recommend a BBK kit that includes a billet aluminum firewall adjuster. Part# 15055 or 16095

BBK Performance direct-replacement in-tank fuel pumps continue to be the number one brand of high-volume pumps for today’s fuel injected enthusiasts.

Their OEM Dimensions allow these BBK Fuel Pumps to be swapped without any modifications making them a great upgrade or replacement unit.

These high performance in tank fuel pumps deliver up to 255 LPH and are recommended for any high performance engine especially turbo, nitrous and supercharged models.

BBK performance fuel pump kits include a new strainer and installation hardware.

They are available for most domestic and import performance applications.

Please Note:
Pumps Will Not Work On Post 97 "Returnless" Style Fuel Systems!!

As one of today’s favorite performance bolt-ons, cold air intake systems kits deliver great looks as well as real world horsepower gains.

As the originator of the first of these chrome systems back in the early nineties, our famous BBK line continues to offer the leading edge quality and function that BBK customers expect.

All BBK cold air intake systems utilize a high flow washable conical cotton element filter and most are designed as fender well units to maximize performance. In addition to our standard hand polished and chrome plated cold air intake systems, we now offer a variety of kits utilizing a custom designed lightweight aluminum inlet casting, which is hand polished and chrome plated. These trick castings deliver unmatched quality and a custom fit for a variety of auto and truck applications.

Each cold air intake model has been designed and dyno tested at the BBK headquarters in Southern California to maximize performance.

Made from aircraft quality machined steel or aluminum alloy these BBK under drive front accessory pulley kits are one of the easiest ways to free up an average 8-15 horsepower in under 30 minutes.

These BBK pulley kits are designed as direct bolt on replacements for the current factory pulleys and retain full cooling and charging characteristics.

Each BBK under drive pulley kit is vehicle specific. They are designed and tested at the BBK headquarters in Southern California for maximum performance.

These under drive pulley kits are available in a hand polished aluminum finish or gloss black powder coated steel. Each kit comes with complete installation instructions and allow the use of existing serpentine belts.

NOTE:
Fits 86-93 5.0L EFI motors

ALL BBK Shorty Tuned Length Mustang 1996-2004 4.6 GT 2V Exhaust headers are manufactured with 1 5/8" CNC mandrel bent tubing for unrestrictive airflow and one piece laser cut 3/8" flange for added strength and durability. ALL BBK Headers are Pressure tested to ensure leak free performance.

Each BBK Mustang shorty Tuned length exhaust header for the 1996-2004 4.6L GT V8 Ford Mustang has been designed and dyno tested at the BBK headquarters in Southern California to Maximize performance.

BBK’s Mustang headers offer distinctive quality that guarantees many years of top performance.

These BBK CNC Series headers for the Ford Mustang 4.6 liter GT are available with our optional high-temp show quality Silver polished ceramic coating or chrome finish.

Direct bolt on – all gaskets and hardware included.

BBK Performance H pipes have been the number one performance brand Ford Mustang enthusiasts have enjoyed for years.

All BBK direct replacement H-pipes feature 2.5” diameter CNC mandrel bent aluminized tubing to ensure maximum flow and horsepower.

OEM-Original o2 sensor locations and factory style die-stamped flanges ensure a perfect fit and BBK In-house dyno-testing has shown solid gains of 15-20 horsepower depending on application.

ALL BBK full length H pipes are designed as direct bolt on to factory headers or any aftermarket shorty headers as well as of course BBK shorty headers for weekend track or race use.

Each BBK H pipe offers performance, quality and value that guarantees years of top performance for your Ford Mustang.

New applications are being updated to the ever growing BBK Performance product line if you do not see your application

Please note:
*ALL – OFF ROAD pipes do not have any catalytic converters and are manufactured and represented ONLY for the purpose of OFF ROAD-RACE USE ONLY.
*These High Performance pipes are NOT EPA Street Legal in any state.